Why Proper Cleaning Matters for a Clear Stroker
A clear stroker like the Playboy Pleasure THE URGE LARGE is made from body-safe TPE and ABS. These materials are non-porous and phthalate-free, but they still need regular cleaning to prevent bacteria buildup. Without proper care, the clear material can cloud, and the soft inner channel may degrade faster.
The good news: the cap and inner sleeve are removable, making cleaning much easier than with sealed strokers. This design also helps you dry the toy thoroughly, which is the most common step people overlook.
What the Catalog Tells Us About This Stroker
- Playboy Pleasure THE URGE LARGE - Clear Stroker: The cap and inner sleeve are removable for easy cleaning. Removable parts let you clean every surface, especially the beaded inner channel where residue can hide.

Playboy Pleasure THE URGE LARGE - Clear Stroker - Playboy Pleasure THE URGE LARGE - Clear Stroker: Material: Body-safe TPE & ABS, phthalate & latex free. TPE is sensitive to silicone-based lubricants and some cleaners. Stick to water-based lubes and mild soap to avoid damaging the material.
- Playboy Pleasure THE URGE LARGE - Clear Stroker: Waterproof & Submersible: Yes. You can rinse the entire stroker under running water without worrying about electronics or internal damage.
Step-by-Step Cleaning Routine
Clean your stroker before first use and after every session. The process takes about two minutes once you have the routine down.
- Disassemble the stroker: Remove the cap and pull the inner sleeve out of the canister. This exposes the beaded channel and all internal surfaces.
- Rinse with warm water: Run warm (not hot) water over the sleeve and canister to flush out any lubricant or residue. The toy is waterproof, so you can do this over a sink.
- Clean with mild soap or toy cleaner: Apply a small amount of mild, fragrance-free soap or a dedicated sex toy cleaner to the sleeve. Gently work it through the channel with your fingers. Rinse thoroughly until no soap remains.
- Dry completely: Pat the sleeve and canister with a lint-free cloth, then let them air dry on a clean towel. Moisture trapped inside the channel is the main cause of mold or material breakdown.
- Reassemble and store: Once dry, slide the sleeve back into the canister and replace the cap. Store the stroker in a cool, dry place away from direct sunlight and other toys that might transfer dyes or oils.
What Not to Do
Avoid using boiling water, alcohol, or harsh disinfectants on the TPE sleeve. These can cause the material to become sticky or brittle. Stick to warm water and mild soap. Also, do not use silicone-based lubricants with this stroker—they can bond with the TPE over time and ruin the texture.
The supplied information does not include specific cleaning intervals or manufacturer-approved cleaners, so when in doubt, use a toy cleaner labeled for TPE or porous materials.


