Getting Started with Your LuvPump BathFun
The LuvPump BathFun is a waterproof automatic penis pump designed for use in the bath, spa, shower, or dry. Its fully submersible build and simple button controls make it easy to use in water without worrying about damage. Before your first session, charge the pump fully using the included USB magnetic charger – a flashing white LED indicates charging, and the supplied information confirms a full charge takes 150 minutes.
Choose Your Sleeve
The BathFun kit includes two sleeves, each giving a different feel. The Comfort Silicone Sleeve offers a wider, more forgiving seal – great for everyday use and easier to seal against your body. The Magic Sleeve provides a more intense, surround-style sensation when you want something stronger. Try both to see which you prefer; swapping sleeves is straightforward and lets you customize each session.
Using the Pump Step by Step
- 1. Prepare the pump and sleeve: Attach your chosen sleeve to the pump body. Make sure it’s seated firmly. If using in the bath, ensure the pump is fully submerged before turning it on – the design is fully submersible for true underwater use.
- 2. Power on: Press and hold the power button for 3 seconds to turn the pump on. The supplied information confirms this 3-second hold is the standard power-on method.
- 3. Adjust suction speed: The pump offers three suction speeds. Use the buttons to cycle through speeds until you find a comfortable intensity. Start low and increase gradually.
- 4. Use the release function: If you need to release pressure quickly, press the dedicated release button. This drops the suction immediately, making it easy to remove the pump when you’re done or want to adjust.
- 5. Power off and clean: Hold the power button for 3 seconds to turn the pump off. Rinse the pump and sleeve with warm water and mild soap, then dry thoroughly before storing. The waterproof design makes cleanup simple.
Charging and Battery Life
The LuvPump BathFun uses a USB magnetic charger – just attach the magnetic cable to the pump’s charging port. A full charge takes 150 minutes. Once charged, you can expect up to 160 minutes of use on high speed or 180 minutes on low speed, depending on your settings. The battery is a 700 mAh lithium cell, so you’ll get several sessions before needing to recharge.
Key Specifications from the Product Records
- LuvPump BathFun - USB Rechargeable Waterproof Automatic Penis Pump: Total length with Comfort Silicone sleeve: 30.5 cm; insertable length: 19.5 cm. With Magic sleeve: total length 32.0 cm; insertable length 22.0 cm. Knowing the insertable length helps you gauge fit and comfort before use.

LuvPump BathFun - USB Rechargeable Waterproof Automatic Penis Pump - LuvPump BathFun - USB Rechargeable Waterproof Automatic Penis Pump: Battery is 700 mAh lithium; charging time 150 minutes; runtime 160 minutes on high speed, 180 minutes on low speed. Plan your sessions around battery life – a full charge gives you plenty of time for multiple uses.
- LuvPump BathFun - USB Rechargeable Waterproof Automatic Penis Pump: Fully submersible and waterproof design; three suction speeds plus a release function. You can use the pump in the bath or shower without worry, and the release button adds safety and control.
Tips for Best Results
For a better seal, apply a small amount of water-based lubricant to the sleeve opening before use. If using in the bath, warm water can enhance comfort – the pump is designed to work fully submerged. Start with the lowest suction speed and increase only when you feel comfortable. The release function is there for a reason: use it whenever you need to break suction quickly.
What the Records Don’t Tell You
The supplied information does not include specific instructions for preparation or operating steps beyond what’s listed here. For any detailed care or safety guidelines not covered, refer to the manufacturer’s manual included with your pump. Always listen to your body – if something feels uncomfortable, stop and adjust.


