Glass Dildo With a Ring Pull: How to Use the Gender X BLOW POP Plug

Glass Dildo With a Ring Pull: How to Use the Gender X BLOW POP Plug

By Whisper Bloom | Australian sex | Published: 2026-11-04

Category: Veiledninger

Learn how to insert, wear, and remove the Gender X BLOW POP glass plug safely, including temperature play, lube choice, and why the ring pull makes removal easier.

Quick answer

Use plenty of thick water-based or hybrid lube, insert the tapered tip slowly while relaxing, and always remove by pulling the ring straight back—never twist or yank. Clean the glass before and after every use.

Why glass and a ring pull change the usual plug routine

Glass is nonporous and waterproof, so it cleans more thoroughly than porous materials and works with any lube type. That also means you can warm or cool it for temperature play—but the same smooth surface gives you very little friction feedback, so go slower than you would with a textured plug.

The ring pull on the Gender X BLOW POP is more than decoration: it gives your fingers a secure grip for controlled insertion and removal, especially when lube makes the base slippery. The flared base still does the safety job—the ring is a handling aid, not a handle for twisting.

Lube and relaxation: the two things beginners skip

A glass plug has no give, so the lube needs to stay put. Thick water-based gel or a hybrid lube works well; silicone lube is also compatible with glass, but it can get slippery enough to make the ring pull harder to grip. Apply lube to the plug and to yourself, and keep the bottle within reach.

Relaxation matters more than force. Breathe out as you insert, and if you feel a sharp pinch, stop and wait rather than pushing through it. A glass plug rewards patience because there is no squish to absorb a rushed angle.

Step-by-step: using the Gender X BLOW POP plug

  1. Clean and inspect before every use: Wash the glass with warm water and mild soap or a toy cleaner, rinse well, and dry it. Check the glass for chips or cracks and make sure the aluminium ring is firmly attached. Common mistake: skipping the inspection because the plug looks fine—small chips are hard to see and can irritate. If you find any damage, do not use the plug.
  2. Choose lube and apply generously: Use thick water-based or hybrid lube on the insertable tip, the stem, and yourself. If you plan temperature play, lube after warming or cooling the glass, not before. Common mistake: too little lube—glass does not absorb lube, but it also gives no cushioning, so reapply if it starts to drag. Keep the lube bottle within reach for mid-use reapplication.
  3. Warm or cool the plug safely: Immerse the glass in warm (not hot) or cool water for a few minutes, then dry it and test the temperature against your wrist before insertion. Never microwave, boil, or freeze the plug. Common mistake: using water that is too hot—glass holds heat, so err on the cooler side. Temperature play is optional; skip it if you are unsure.
  4. Insert slowly while breathing out: Lie on your side or back, relax your anal muscles, and press the tapered tip gently against the opening. Breathe out as you ease it in, letting the plug's taper do the work. Stop at any sharp pain. Common mistake: pushing straight in with force—angle the tip slightly toward your tailbone and let your body accept it. The flared base should sit comfortably outside; if it starts to slip inside, stop and remove the plug.
  5. Wear it with awareness: Once seated, the flared base and ring should rest outside the body. Move gently at first, and check in with yourself—glass gives no stretch, so discomfort means remove it, not push through. Common mistake: wearing it for hours without checking; take breaks and remove if you feel numbness or pain. Never wear the plug during sleep or when you cannot remove it quickly.
  6. Remove using the ring pull, not a twist: Relax, breathe out, and grip the ring with your fingers. Pull slowly and steadily straight back—do not twist or yank. If it feels stuck, stop, add more lube around the base, and wait a moment before trying again. Common mistake: rushing removal, which can cause a sudden pinch. If the ring feels slippery, wipe your fingers and the ring dry before pulling.
  7. Clean and store after use: Wash the plug with warm water and soap or toy cleaner, rinse, and dry completely. Store it in a pouch or box away from other toys to prevent chips. Common mistake: leaving it damp or loose in a drawer—glass can chip against hard objects. A dedicated storage pouch protects the glass and keeps the ring from tangling.

Product facts

  • Gender X BLOW POP - Black 12.8 cm Glass Plug with Ring Pull: Insertable length is 7.6 cm with a 3.3 cm insertable diameter, and the plug is made from borosilicate glass and aluminium alloy. That is a modest insertable length for a beginner, but the 3.3 cm diameter still needs slow, well-lubed insertion—do not treat the short length as a reason to rush.
    Gender X BLOW POP - Black 12.8 cm Glass Plug with Ring Pull
    Gender X BLOW POP - Black 12.8 cm Glass Plug with Ring Pull

Shop Related Products

Gender X BLOW POP - Svart 12,8 cm glassplugg med ringtrekk

Gender X BLOW POP - Svart 12,8 cm glassplugg med ringtrekk

$50.50 $101.00

Shop Now